HONDA-USA

[ Pobierz całość w formacie PDF ]
SW- HONDA
®
GROUP-L0 (SDD/SBB)
CODE: D431373XA - VERS. 3.0
GB
INDEX
1
HONDA® GROUP (HONDA® USA- ACURA® ) FUNCTIONS MENU ........... 3
1.1
ADDING KEY ....................................................................................... 5
1.2
NUMBER OF KEYS IN MEMORY........................................................ 8
1.3
ERASE ALL KEYS ............................................................................... 9
1.4
REPLACE IMMO ECU ....................................................................... 12
SW- PRG. HONDA
®
GROUP-L0 (SDD/SBB)
HONDA
®
GROUP (HONDA
®
USA- ACURA
®
) FUNCTIONS MENU
The functions on these vehicles are:
- Add new keys (max. 6, with 1 key programmed);
- Reading of the number of keys/cards memorized;
- Delete all keys present (and code new keys);
- Immobilizer replacement (for Prelude model only).
To make use of this function, use:
1
SWITCH ADAPTER
NOT REQUIRED
CABLE OBD II [00] (STANDARD)
> ERASE ALL KEYS
If no keys are operational, delete those
in the memory and programme at least 2
of them
.
> ADD
There must be 1 operational key available
> IMMOBILIZER REPLACEMENT
(For Prelude only, when all the keys are
mislaid)
ORIGINAL KIT:
A) red Master key
B) black key
C) central unit
N.B. Besides A and B operational,
programme at least 1 new key
- Keys to be programmed (Max.6)
SBB
CABLE/ADAPTER
CABLE OBD II [00] (STANDARD)
W
HERE TO FIND THE PLUG DIAGNOSTICS
C22
3
 SELECTING THE CAR MAKE
In this case SDD/SBB is able to automatically recognize the various central units connected
and therefore uses the right communication procedure.
Simply identify:
-
CAR MODEL;
-
YEAR OF MANUFACTURE.
- HONDA -
CIVIC (02- )
CR-V (02- )
JAZZ (01- )
>

-
Use the
arrow keys to select the make, then press
ENTER
;
-
Press
ESC
to quit.
FUNCTIONS MENU
This section allows the functions to be carried out, in particular to:
-
Programme new keys in the immobilizer also when all the original keys are missing;
-
Delete the code for a missing key from the immobilizer memory;
-
Check how many keys are stored in the immobilizer memory;
-
Adapt the new ECU immobilizer (only for Prelude Model).
the programming system for HONDA
®
GROUP (without a red key) is structured so that
single keys can be added to the immobilizer system as long as there is at least one
working key available. If all the working keys are missing the “ERASE ALL KEYS”
function must be used, with which to delete all the keys in the memory and code new
keys.
ATTENTION:
The structure of the HONDA
®
functions menu is as follows:
-
There is already a key in the
ON
position on the ignition unit.
Depending on the vehicle model selected, the following is displayed:
- HONDA -
- HONDA -
- HONDA -
ADDING KEY
NUM.OF KEYS IN MEM.
ERASE ALL KEYS
NUM.OF KEYS IN MEM.
ERASE ALL KEYS
REPLACE IMMO ECU
>
>
>
-
Select and press
ENTER
.
4
 1.1
ADDING KEY
This function is used to add a new key to the immobilizer.
To programme a new key there must be at least one working key available.
-
To enable the function select “
ADD A KEY
” and press
ENTER
.
The display will show:
- ADD A KEY -
IT IS NECESSARY
TO HAVE 1 KEY
ALREADY PROGRAMMED
- Press
ESC
to quit;
- Press
ENTER
to confirm.
The display will show:
Turn ignition ON!
Press any key...
-
Turn the key to the
OFF
position and press a key (within 20 sec.).
Insert already
programmed key.
Turn ignition ON.
Want to go on?
>YES
NO
-
Fit a programmed working key into the ignition block (customer’s key), and turn to the
ON
position;
-
Select YES/NO and press
ENTER
;
-
No
, to return to the screen showing IMMOBILIZER functions menu;
-
Yes
, to memorize the data for the operation just completed;
-
Press
ESC
to quit.
The display will show:
Turn ignition OFF!
Press any key...
-
Turn the key to the
OFF position
and press a key (within 20 sec.).
5
  [ Pobierz całość w formacie PDF ]

zanotowane.pl

doc.pisz.pl

pdf.pisz.pl

chiara76.opx.pl