HP CLJ4600, Regeneracja tonerów
[ Pobierz całość w formacie PDF ]
HP4600TECH
Technical Instructions
Printers
OEM Info
Tools
1
Canon ImageClass C2500
Canon LBP-2510
HP Color LaserJet 4600
HP Color LaserJet 4600 DN
HP Color LaserJet 4600 DNT
HP Color LaserJet 4600 HDN
HP Color LaserJet 4650
HP Color LaserJet 4650 N
HP Color LaserJet 4650 DN
HP Color LaserJet 4650 DNT
HP Color LaserJet 4650 HDN
Part Number: C9720A – Black
Yield @ 5%: 9,000pgs
Part Number: C9721A – Cyan
Yield @ 5%: 8,000pgs
Part Number: C9722A – Yellow
Yield @ 5%: 8,000pgs
Part Number: C9723A – Magenta
Yield @ 5%: 8,000pgs
#1 Phillips Screwdriver
Small Flat Blade Screwdriver
Needlenose Pliers
1/8” Drill bit
Padding Powder
Soft Lint-Free Cloth
Cotton Swabs
Conductive Grease
Anhydrous Isopropyl Alcohol
Vacuum or Compressed Air
CORPORATE
LOS ANGELES, USA
US 1 800 394.9900
Int’l +1 818 837.8100
FAX 1 800 394.9910
Int’l +1 818 838.7047
ATLANTA, USA
US 1 877 676.4223
Int’l +1 770 516.9488
FAX 1 877 337.7976
Int’l +1 770 516.7794
DALLAS, USA
US 1 877 499.4989
Int’l +1 972 840.4989
FAX 1 877 774.1750
Int’l +1 972 840.1750
Photo 1
Step 1
Place the cartridge on the work bench so
the waste hopper is up and the blue cartridge
handles are facing you.
(See Photo 1)
MIAMI, USA
US 1 800 595.429
Int’l +1 305 594.3396
FAX 1 800 522.8640
Int’l +1 305 594.3309
NEW YORK, USA
US 1 800 431.7884
Int’l +1 631 345.0121
FAX 1 800 431.8812
Int’l +1 631345.0690
SANFORD,USA
US 1 800 786.9049
Int’l +1 919 775.4584
FAX 1 800 786.9049
Int’l +1 919 775.4584
TORONTO,CAN
CAN 1 877 848.0818
Int’l +1 905 712.9501
FAX 1 877 772.6773
Int’l +1 905 712.9502
Photo 2
Step 2
Locate the square holes located
(shown in
Photo 2 and Photo 3)
on the top left and right
sides of the waste hopper.
BUENOS AIRES, ARG
ARG 0810 444.2656
Int’l +011 4583.5900
FAX +011 4584.3100
MELBOURNE, AUS
AUS 1 800 003. 100
Int’l +62 03 9561.8102
FAX 1 800 004.302
Int’l +62 03 9561-7751
Photo 3
SYDNEY, AUS
AUS 1 800 003.100
Int’l +62 02 9648.2630
FAX 1800 004.302
Int’l +62 02 9548.2635
MONTEVIDEO,URY
URY 02 902.7206
Int’l +5982 900.8358
FAX +5982 908.3816
JOHANNESBURG, S.A.
S.A. +27 11 974.6155
FAX +27 11 974.3593
E-mail: info@futuregraphicsllc.com
Website:
www.futuregraphicsllc.com
2
HP4600 Technical Instructions
Photo 4
Step 3
Using a 1/8 inch drill bit, drill a hole through the
square holes on top of the waste hopper. The
hole must be drilled at an angle so the drill bit
hits the end of the cartridge pin, forcing the pin
outward.
(See Photo 4)
Photo 4b
NOTE:
If the pins are not pushed out, insert
a small flat blade screwdriver into the drilled
holes and push the pin out the end of the
cartridge.
(See Photo #4b)
Photo 5
Photo 6
Step 4
Flip the cartridge over so the toner hopper is
facing up. Using diagonal cutters, remove the
cartridge pins from each end of the cartridge.
(See Photos 5 & 6)
Notes
Photo 7
Step 5
Using a spring hook, release the tension spring
that holds the waste hopper to the toner hop-
per on the contact side of the cartridge.
(See Photo 7)
Photo 8
Step 6
Lift the toner hopper away from the waste hop-
per.
(See Photo 8)
Set the toner hopper aside.
Photo 10
Photo 9
Step 7
Using a small Phillips screwdriver, remove the
screw that holds the blue cartridge handles on
each end of the waste hopper.
(See Photos 9 & 10)
HP4600 Technical Instructions
3
Photo 11
Step 8
Remove the blue cartridge handle and the ten-
sion spring from the contact side of the waste
hopper.
(See Photo 11
)
Notes
Photo 12
Step 9
Using a spring hook, pull the tines holding the
lock washer to the drum axle.
(See Photo 12)
Pull on each tine one at a time until the washer
is removed.
Photo 13
Step 10
Remove the washer from the drum axle.
(See Photo 13
)
Photo 14
Step 11
Grab the drum drive hub located on the drum
axle and pull the axle out from the drum.
(See Photo 14)
NOTE:
It maybe necessary to tap the drum
axle out from the contact side of the cartridge.
The drum axle bearing may come out when the
drum axle is removed from the hopper. If not,
remove the drum axle bearing from the contact
side of the waste hopper.
(See Photo 15)
Photo 15
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
4
HP4600 Technical Instructions
Photo 18
Step 14
Remove the drum shutter bar from the gear
side of the hopper.
(See Photo 18)
Step 12
Carefully lift the drum out from the
waste hopper.
(See Photo 16)
Photo 16
Photo 19
Step 15
Remove the drum shutter from the drum shutter
arm.
(See Photo 19)
Photo 20
Step 16
Remove the PCR.
(See Photo 20)
Clean the PCR using a lint-free cloth.
Step 13
Pull the drum shutter bar out of its
positioning hole on the contact side
of the waste hopper.
(See Photo 17)
If needed, water can also be used to clean the
PCR.
Photo 17
Photo 21
Step 17
Carefully bend back the brown film on the
wiper blade to access the screws holding the
wiper blade. Remove the two screws using a
Phillips screwdriver.
(See Photo 21)
Photo 22
Step 18
Lift one end of the wiper blade and pull the
blade away from the sealing foam.
(See Photo 22)
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
E-mail: info@futuregraphicsllc.com
Website:
www.futuregraphicsllc.com
HP4600 Technical Instructions
5
Photo 23
Step 19
Dump the waste toner from the hopper. Using
a vacuum or dry compressed air, clean out the
waste hopper.
Notes
Step 20
Remove the OEM wiper blade sealing foam.
(See Photo 23)
Photo 24
Step 21
Clean the waste hopper using a dry lint-free
cloth. Apply the wiper blade sealing end foams
onto the waste hopper at each end of the
waste hopper.
(See Photo 24)
Photo 25
Step 22
Apply the wiper blade sealing foam to the
waste hopper.
(See Photo 25)
Photo 26
Step 23
Apply padding powder to the new wiper blade.
Install the blade and the two screws that hold
the blade in place.
(See Photo 26)
Photo 27
Step 24
Install the cleaned PCR into the hopper.
(See Photo 27
)
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
[ Pobierz całość w formacie PDF ]
zanotowane.pl doc.pisz.pl pdf.pisz.pl chiara76.opx.pl
HP4600TECH
Technical Instructions
Printers
OEM Info
Tools
1
Canon ImageClass C2500
Canon LBP-2510
HP Color LaserJet 4600
HP Color LaserJet 4600 DN
HP Color LaserJet 4600 DNT
HP Color LaserJet 4600 HDN
HP Color LaserJet 4650
HP Color LaserJet 4650 N
HP Color LaserJet 4650 DN
HP Color LaserJet 4650 DNT
HP Color LaserJet 4650 HDN
Part Number: C9720A – Black
Yield @ 5%: 9,000pgs
Part Number: C9721A – Cyan
Yield @ 5%: 8,000pgs
Part Number: C9722A – Yellow
Yield @ 5%: 8,000pgs
Part Number: C9723A – Magenta
Yield @ 5%: 8,000pgs
#1 Phillips Screwdriver
Small Flat Blade Screwdriver
Needlenose Pliers
1/8” Drill bit
Padding Powder
Soft Lint-Free Cloth
Cotton Swabs
Conductive Grease
Anhydrous Isopropyl Alcohol
Vacuum or Compressed Air
CORPORATE
LOS ANGELES, USA
US 1 800 394.9900
Int’l +1 818 837.8100
FAX 1 800 394.9910
Int’l +1 818 838.7047
ATLANTA, USA
US 1 877 676.4223
Int’l +1 770 516.9488
FAX 1 877 337.7976
Int’l +1 770 516.7794
DALLAS, USA
US 1 877 499.4989
Int’l +1 972 840.4989
FAX 1 877 774.1750
Int’l +1 972 840.1750
Photo 1
Step 1
Place the cartridge on the work bench so
the waste hopper is up and the blue cartridge
handles are facing you.
(See Photo 1)
MIAMI, USA
US 1 800 595.429
Int’l +1 305 594.3396
FAX 1 800 522.8640
Int’l +1 305 594.3309
NEW YORK, USA
US 1 800 431.7884
Int’l +1 631 345.0121
FAX 1 800 431.8812
Int’l +1 631345.0690
SANFORD,USA
US 1 800 786.9049
Int’l +1 919 775.4584
FAX 1 800 786.9049
Int’l +1 919 775.4584
TORONTO,CAN
CAN 1 877 848.0818
Int’l +1 905 712.9501
FAX 1 877 772.6773
Int’l +1 905 712.9502
Photo 2
Step 2
Locate the square holes located
(shown in
Photo 2 and Photo 3)
on the top left and right
sides of the waste hopper.
BUENOS AIRES, ARG
ARG 0810 444.2656
Int’l +011 4583.5900
FAX +011 4584.3100
MELBOURNE, AUS
AUS 1 800 003. 100
Int’l +62 03 9561.8102
FAX 1 800 004.302
Int’l +62 03 9561-7751
Photo 3
SYDNEY, AUS
AUS 1 800 003.100
Int’l +62 02 9648.2630
FAX 1800 004.302
Int’l +62 02 9548.2635
MONTEVIDEO,URY
URY 02 902.7206
Int’l +5982 900.8358
FAX +5982 908.3816
JOHANNESBURG, S.A.
S.A. +27 11 974.6155
FAX +27 11 974.3593
E-mail: info@futuregraphicsllc.com
Website:
www.futuregraphicsllc.com
2
HP4600 Technical Instructions
Photo 4
Step 3
Using a 1/8 inch drill bit, drill a hole through the
square holes on top of the waste hopper. The
hole must be drilled at an angle so the drill bit
hits the end of the cartridge pin, forcing the pin
outward.
(See Photo 4)
Photo 4b
NOTE:
If the pins are not pushed out, insert
a small flat blade screwdriver into the drilled
holes and push the pin out the end of the
cartridge.
(See Photo #4b)
Photo 5
Photo 6
Step 4
Flip the cartridge over so the toner hopper is
facing up. Using diagonal cutters, remove the
cartridge pins from each end of the cartridge.
(See Photos 5 & 6)
Notes
Photo 7
Step 5
Using a spring hook, release the tension spring
that holds the waste hopper to the toner hop-
per on the contact side of the cartridge.
(See Photo 7)
Photo 8
Step 6
Lift the toner hopper away from the waste hop-
per.
(See Photo 8)
Set the toner hopper aside.
Photo 10
Photo 9
Step 7
Using a small Phillips screwdriver, remove the
screw that holds the blue cartridge handles on
each end of the waste hopper.
(See Photos 9 & 10)
HP4600 Technical Instructions
3
Photo 11
Step 8
Remove the blue cartridge handle and the ten-
sion spring from the contact side of the waste
hopper.
(See Photo 11
)
Notes
Photo 12
Step 9
Using a spring hook, pull the tines holding the
lock washer to the drum axle.
(See Photo 12)
Pull on each tine one at a time until the washer
is removed.
Photo 13
Step 10
Remove the washer from the drum axle.
(See Photo 13
)
Photo 14
Step 11
Grab the drum drive hub located on the drum
axle and pull the axle out from the drum.
(See Photo 14)
NOTE:
It maybe necessary to tap the drum
axle out from the contact side of the cartridge.
The drum axle bearing may come out when the
drum axle is removed from the hopper. If not,
remove the drum axle bearing from the contact
side of the waste hopper.
(See Photo 15)
Photo 15
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
4
HP4600 Technical Instructions
Photo 18
Step 14
Remove the drum shutter bar from the gear
side of the hopper.
(See Photo 18)
Step 12
Carefully lift the drum out from the
waste hopper.
(See Photo 16)
Photo 16
Photo 19
Step 15
Remove the drum shutter from the drum shutter
arm.
(See Photo 19)
Photo 20
Step 16
Remove the PCR.
(See Photo 20)
Clean the PCR using a lint-free cloth.
Step 13
Pull the drum shutter bar out of its
positioning hole on the contact side
of the waste hopper.
(See Photo 17)
If needed, water can also be used to clean the
PCR.
Photo 17
Photo 21
Step 17
Carefully bend back the brown film on the
wiper blade to access the screws holding the
wiper blade. Remove the two screws using a
Phillips screwdriver.
(See Photo 21)
Photo 22
Step 18
Lift one end of the wiper blade and pull the
blade away from the sealing foam.
(See Photo 22)
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
E-mail: info@futuregraphicsllc.com
Website:
www.futuregraphicsllc.com
HP4600 Technical Instructions
5
Photo 23
Step 19
Dump the waste toner from the hopper. Using
a vacuum or dry compressed air, clean out the
waste hopper.
Notes
Step 20
Remove the OEM wiper blade sealing foam.
(See Photo 23)
Photo 24
Step 21
Clean the waste hopper using a dry lint-free
cloth. Apply the wiper blade sealing end foams
onto the waste hopper at each end of the
waste hopper.
(See Photo 24)
Photo 25
Step 22
Apply the wiper blade sealing foam to the
waste hopper.
(See Photo 25)
Photo 26
Step 23
Apply padding powder to the new wiper blade.
Install the blade and the two screws that hold
the blade in place.
(See Photo 26)
Photo 27
Step 24
Install the cleaned PCR into the hopper.
(See Photo 27
)
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
[ Pobierz całość w formacie PDF ]